GYFXBY Flat Fiber Optic Cable
The structure of flat fiber optic cable is to sheath single-mode or multi-mode optical fiber into a loose tube made of high modulus plastic, and the tube is filled with water blocking compound. The loose tube is covered with double-sided plastic coated (wrinkle) copper tape longitudinally. The water blocking tape between the steel tape and the loose tube ensures the compactness and longitudinal water blocking of the optical cable. Two non-metallic FRP reinforced rear guards are placed on both sides and finally set into a flat fiber optic cable. As a professional fiber optic products supplier, TUOLIMA can customize the optical cable according to your requirements.
Price：Request Pricing
Category：Duct Optical Fiber, Product
86+13823702426
Features
| Item | Technology parameter | |
| Code | 2019-HZSFT-0008 | 2019-HZSFT-0009 |
| Cable type | GYFXBY-2~24B6 | GYFXBY-2~24B1 |
| Fiber type | 9/125 (HT G657A2) | 9/125 (HT G652D) |
| Fiber color | Blue, orange, green, brown, gray, white, red, black, yellow, violet,pink, aqua | |
| Filler | Jelly | |
| Inner jacket color | Natural | |
| Inner jacket material | PBT | |
| Inner jacket diameter mm | 3.0±0.1 | |
| Strength member | FRP &water-blocking yarn | |
| Strength member diameter mm | 1.6 | |
| Outer sheath color | Black | |
| Outer sheath material | PE | |
| Outer sheath dimension mm | 7.7(±0.3)×4.3(±0.3) | |
| Cable weight Kg/km | Approx. 34.9 | |
| Min. bending radius mm | 20D (Static)40D (Dynamic) | |
| Attenuation dB/km | ≦ 0.4 at 1310nm, ≦ 0.3 at 1550nm | |
| Short tensile strength N | 800 | |
| Short crush resistance N/100mm | 2200 | |
| Operation temperature ℃ | -20～+70 | |
Note: the product is in accord with the instruction of EU RoHS
Advantages of GYFXBY Flat Fiber Optic Cable
• The water-blocking tape is longitudinally wrapped to prevent the longitudinal water seepage of the optical cable and fiber optic cable clamps
• Two parallel steel wires ensure the tensile strength of the optical cable
• PE sheath has good resistance to ultraviolet radiation and environmental stress cracking resistance
• Small diameter, light weight, easy to lay
Drawing of GYFXBY Flat Fiber Optic Cable
Packaging
• Packing material: Non-returnable wooden drum.Both ends of cable are securely fastened to drum and sealed with a shrinkable cap to prevent ingress of moisture.
• Cable printing: The sequential number of the outdoor armored fiber optic cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.Cable type and number of optical fiberManufacturer nameMonth and Year of ManufactureCable length
• Drum marking: Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with following:Manufacture name and logoCable lengthCable type and number of fibersRoll wayGross and net weight
